The DSX-SME1/T1 panel is a centralized termination point for digital equipment at DS1 (1.544Mbps) and E1 (2.048Mbps) digital signal bit rate. It provides SDH(Synchronous Digital Hierarchy)networks STM-N(N=1/4/16) terminal equipments, the circuit jumping, cross-connecting, monitoring & testing access functions for the above digital signal bit rate.
The DSX-SME1/T1 panel is Modular design; it is capable of high density installation. Each circuit in the DSX-SMT1/E1 panel is independence for choose the capacity as needed to reduce the initial set-up cost, and for easy maintenance the independent circuit module can be replaced separately. The panel in 23” wide rack consists of 64 circuit’s module in the chassis. 1*2200mm rack can load at least 12 units sub racks.
DSX Panel WW1 Panel with modular contains chassis, Main Module, necessary quantity of circuit module and optional accessories as below:
1.1 The properly space for 64-circuit module (23”)
1.2 The material is rustproof steel.
1.3 Tinned brass terminal pins are provided on the bottom of the front for wire wrapping connection, cable holders are located in both side, the cable tray in the front and rear and circuit name plate sheet are provided for cable storage and management.
1.4 Power pin for –48V DC and terminal pin for grounding (GND) on the top side of the rear.
2.0 Main Module
2.1 Each Main Module provides the precious rail for 8 ports of Circuit Module.
2.2 Tinned brass terminal pins in the rear are provided for wire wrapping.